-40%

Anjon Manufacturing Big Frog Eco-Drive BFED5500 - 5,500 GPH Submersible Pump

$ 237.6

Availability: 97 in stock
  • Cord Length: 30 ft.
  • MPN: BFED5500
  • Part Number: BFED5500
  • Max Head Height: 32 ft.
  • Optimal Head Height: 5 ft. - 27 ft.
  • Condition: New
  • Power Source: Electric
  • Recommended Hose Size: 2 in.
  • Brand: ANJON MANUFACTURING
  • UPC: 602401424272
  • Output Diameter: 2 in. FIPT or 2 in. Hose Barb
  • Volts: 120
  • Watts: 540
  • Type: Submersible Pump

    Description

    Big Frog Pumps lead the market with a less than 1% return ratio. These pumps just don't fail! Specially engineered for 24-hour continuous use, you can trust Big Frog Pumps around the clock. We provide high-quality seals to ensure a long and efficient pump life. Because Big Frog Pumps are not oil-filled, with only biodegradable oil used on bearings, you are able to protect your fish. Plus, with the use of the fish/ frog guard, Big Frog Pumps are wildlife safe. Big Frog Pumps also have the ability to pass solids up to 1.25" in diameter. Big Frog Pumps resist abrasion and corrosion with the help of the stainless steel construction with reinforced fiberglass. Big Frog Pumps even protect against overheating and burning out with their overload sensor shut-off protection.
    Anjon Manufacturing Big Frog Eco-Drive BFED5500 - 5,500 GPH Submersible Pump
    Big Frog Pumps lead the market with a less than 1% return ratio. These pumps just don't fail! Specially engineered for 24-hour continuous use, you can trust Big Frog Pumps around the clock. We provide high-quality seals to ensure a long and efficient pump life. Because Big Frog Pumps are not oil-filled, with only biodegradable oil used on bearings, you are able to protect your fish. Plus, with the use of the fish/ frog guard, Big Frog Pumps are wildlife safe. Big Frog Pumps also have the ability to pass solids up to 1.25" in diameter. Big Frog Pumps resist abrasion and corrosion with the help of the stainless steel construction with reinforced fiberglass. Big Frog Pumps even protect against overheating and burning out with their overload sensor shut-off protection.
    Anjon Manufacturing Big Frog Eco-Drive BFED5500 - 5,500 GPH Submersible Pump
    Engineered for 24-hour use
    Not oil filled- fish safe biodegradable oil for bearings only
    High quality seals for long and efficient pump life
    Overload sensor shut-off protection to keep pump from over heating or burning out
    Full 2-year warranty
    FAQs & Calculations to Help Select the Correct Kit
    1. How Many Gallons of Water does My Water Feature Hold?
    Rectangular Ponds
    Length x Width x Average Depth x 7.48 = Gallons
    Example: A rectangular pond 15’ long, 10’ wide and 1.5’ Deep Pond is...
    15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
    Oval Ponds
    Length x Width x Average Depth x 0.8 x 7.48 = Gallons
    Example: An oval pond 15’ long, 10’ wide and 1.5’ deep is...
    15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
    Round Ponds
    Length x Width x Average Depth x 7.48 =Gallons
    Example: 15’ long, 10’ wide and 1.5’ Deep Pond
    15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
    Streams
    Length x Width x Average Depth x 0.25 x 7.48 = GALLONS =Gallons
    Example: 15’ long, 10’ wide and 1.5’ Deep Pond
    15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
    2. How Big of a Pump Do I Need??
    Minimum pump size is determined by pond type, water volume, head height and friction loss. The minimum pump size recommendations are:
    Water Garden, Few Small Goldfish
    Circulate total pond water valoume every 2 hours.
    Example: 2,000 GPH pump for a 3000-gallon pond with 2’ waterfall.
    Fish Pond, Several Small Fish
    Circulate total pond water valoume every 1 hour.
    Example: 3,800 GPH pump for a 3000-gallon pond with 2’ waterfall.
    Koi Pond, Several Large Fish
    Circulate total pond water valoume every 3/4 hours.
    Example: 2,000 GPH pump for a 3000-gallon pond with 2’ waterfall.
    Calculating Head Height
    Dynamic head pressure is found by taking the vertical height of your waterfall; the distance between where your pump is (typically in the skimmer) and where your waterfall is, and adding the static head pressure (pipe and fittings) 1’ for every 10’ of tubing and 1’ for every elbow or “T” fitting.
    Example: 3' (vertical height) + 2.5 (25' of tubing) + 2' (for 2 elbows) = 7.5' of Dynamic Head Pressure
    Note:
    It is important to take into consideration while calculating how much flow will be at the top of your waterfall by accounting for the head height due to the laws of fluid dynamics. Please refer to the flow chart above to help choose the correct pump.
    3. What Size Tubing Do I Need?
    Tubing Size
    Efficiency GPH
    Minimum GPH
    Maximum GPH
    0.5”
    < 300
    60
    420
    0.75”
    < 720
    300
    900
    1”
    < 1,200
    700
    1,500
    1.25”
    < 1,600
    900
    3,200
    1.5”
    < 2,600
    2,000
    4,400
    2”
    < 4,800
    3,000
    6,800
    3”
    < 9,000
    6,000
    14,000
    4”
    < 21,000
    14,000
    28,000
    6”
    < 42,000
    33,000
    60,000
    About Half Off Ponds
    Customer service is our business. We have been satisfying fish pond, water garden, and backyard waterfall enthusiasts for over 25 years! We're glad to assist you with your pond building project - from start, to finish!
    Thanks for your business! We appreciate it!
    - The Half Off Ponds Team