Procon 111A100f11aa 250 Pump, Rotary Vane, Brass, Max. Flow (Gph)

Description

The Procon 111A100F11AA Brass Pump has a strainer that is equipped with a removable cap to allow periodic cleaning, every 4 months under normal conditions (more frequently with hard or turbid water). The standard strainer is a 100 mesh wire screen. It traps particles that can cause serious damage to the pump. The maximum discharge pressure is 250 psi. These parts are intended for original use only. OEM approved for safety and reliability. PROCON provides new pumps to manufacturers and end users for systems that require transferring clean liquids at pressures up to 250 psi and flows up to 11 gallons per minute.
Item
: Rotary Vane Pump
GPH of Water @ 150 PSI
: 98 gph
Relief Pressure Max. (PSI)
: 250
GPH of Water @ 50 PSI
: 102 gph
Max. Pressure (PSI)
: 250 psi
Mounting
: Carbonator Clamp Style
HP @ 50 PSI
: 1/4 hp
GPH of Water @ 200 PSI
: 96 gph
HP @ 250 PSI
: 1/2 hp
Relief Valve PSI Setting
: 200 psi
HP @ 150 PSI
: 1/3 hp
Shaft
: 303 Stainless Steel
GPH
: 100 gph
Built-In
: Relief Valve
Body Material
: Brass
By-Pass
: Yes
GPH of Water @ 100 PSI
: 100 gph
GPH of Water @ 250 PSI
: 94 gph
Inlet/Outlet NPTF (In.)
: 3/8 in
Min. Flow Rate (GPH)
: 94 gph
Max. Flow (GPH)
: 112 gph
Max. Temp. (F)
: 158 Degrees F
HP @ 100 PSI
: 1/4 hp
Filter Strainer
: 100 Mesh
HP @ 200 PSI
: 1/3 hp
External Relief
: Not Required